无刷电子调速器使用说明书

BRUSHLESS ESC INSTRUCTION MANUAL
Thank you for buying our brushless ESC. Before using the product, please read this manual 1. INSTRUCTIONS
A. Scientific circuitry designs, all of them are make from import components.
B. Using lowest impedance PCB, the capability of enduring current is good and compeletly
reach the current specifications marked. C. Controlling circuitry and BEC circuitry use independent circuitry to supply power, they have
better anti-jamming ability, which can avoid wild possiblity. D. Controlling circuitry and power output use independent PCB, which can prevent the
tempreture of power tubal effect controlling circuit. There are 2mm clearances on controlling PCB and power output PCB so that there is better heatradiating surroundings. E. Good temperature protection circuit.
F. Over- voltage protection and low- voltage protection function.
G. Super soft and superior timing linearity feeling.
2.SPECIFICATIONS
Max Current: 50A( not less than 10 seconds) BEC Current: Max 2A( linearity voltagestabilizing component) 3. FUNCTIONS
A. Safety start-up mode: when ESC gets power, the throttle sticker of transmitter which is in
B. Low-voltage protection: when input voltage is less than enactment value, ESC can decrese or
close power input automatically and protect drive battery effectively. C. Over-voltage protection: when input voltage is less than enactment value, ESC will utter
alarm, and ESC will stop working, which prevent ESC from damageing. D. Over-heat protection: when the temperature is out of range, ESC will breake off power
output automatically, which can protect ESC effectively. E. Battery type option: there are two options.
F. Start-up mode: there are three modes which can be used for all model aerocrafts.
G. Transmitter compatibility:T setting throttle travel, being compatible with all brand
H. Safety: using ESC properly, if ESC lose remote control signal, ESC will colse output
automatically, which avoid loss causing by losing control. 4. THROTTLE SETTING INSTRCTIONS:
Throttle setting is only used for using ESC first time or using ESC match new transmitter
A. Turn on transmitter, move the throttle stick to the top point, switch on ESC power.
B. There is “di---” sound on brushless motor, when ESC switches on.
C. Wait for 2 seconds, then brushless motor will utter “di---di---”, when the throttle reaches the
D. Move the throttle stick to the low point.
E. Wait for 1 second, then brushless motor will utter “di---”, when throttle reaches the low
F. When brushless motor utters“di---di---di------di”, when all ready.
G. Then you can use ESC.
5. PROCESS INSTRUCTIONS OF NATURAL USING
A. Turn on transmitter, move the throttle stick to the low point,
B. Brushless motor utters “di---”, when power is on.
C.Brushless motor utters “di---di---di------di”, when all ready.
D.Then you can use ESC.
6. ESC PROGRAMM SETTING
There are four steps:
Choose parameter item under setting item. A. ENTER PROGRAM MODE
a. Turn on transmitter, move the throttle stick to the top point, connect up ESC power.
b. Brushless motor utters “di---”, when power is connected up.
c. Wait for 2seconds, then brushless will utter “di---di---”.
d. Go on waiting for 5 seconds, then brushless motor will utter “di---”, when program
B. CHOOSE SETTING ITEM
CAUTION: Entering program mode, brushless will utter some tones circularly, when you
hear some tone, move the throttle stick of transmitter to the low point in 2 seconds and enter the setting item, or brushless will utter next setting item tones. Some tones circularly are as b. “di—di---” battery type setting tone c. “di---di---di---” low-voltage protection mode setting tone d. “di---di---di---di---” low-voltage protection voltage value setting tone e. “di---” startup mode setting tone f. “di—di---” timing option setting tone g. “di---di---di---” set to default setting tone C. CHOOSE SETTING ITEM PARAMETER
CAUTION: Brushless motor will utter serval typies tones circularly, after choosing some
setting item. After some tone,if you move the throttle stick of transmitter to the top point in 1 second, it means that you choose the setting parameter which corresponds to the tone, then the brushless motor will utter “di---”, it indicates ESC has chosen the parameter and will keep it enduringly. If you do not want to set up other parameters, you can move the throttle stick to the low point in 2 seconds to exit programme setting item fleetly, if you want to go on setting up other parameters, please return the step of CHOOSE SETTING ITEM to choose other 7. The corresponding parameter diagram of tones:
DI-DI-DI
SETTING ITEM
▲ Lithium battery NiMH/NiCd battery
Remakes: the option marked “▲”is factory default parameter.
8. SIMPLE INSTRUCTION OF EVERY FUNTION
BRAKE SETTING
OFF: When the throttle stick of transmitter is on the lowest point, brushless motor
will cease gradually with rotation inertia. ON: When the throttle stick of transmitter is on the lowest point, ESC control
brushless motor which will cease fleetly. BATTERY TYPE SETTING
Lithium battery: Lithium hydronium battery or Lithium polymer battery
NiMH /NiCd battery: Nickel-Metal Hydride battery /Nickel-Cadmium battery
LOW-VOLTAGE PROTECTION MODE SETTING
Decrease power output: when voltage value of battery is lower than enactment value of ESC, ESC will
decrease power output, this condition will last about 10 seconds, at last, ESC colse Close power output: when voltage value of battery is lower than enactment value of ESC, ESC will colse
LOW-VOLTAGE PROTECTION VOLTAGE VALUE SETTING
When you setup using Lithium battery, ESC will indentify the quantity of battery
automatically
LOW: the voltage of battery monomer is2. 6V
MIDDEL: the voltage of battery monomer is 2.6V
HIGHT: the voltage of battery monomer is 3.0V
When you setup using Nickel-Metal hydride battery /Nickel-Cadmium battery, ESC will
identify battery dischage per percent value of voltage.
MIDDLE: 65%
HIGH: 70%
STARTUP MODE SETTING
FAST-START: ESC will startup brushless motor fleetly in 0.5 second( being used
for electromotion glider).
MILD-START: ESC will startup brushless motor slowly in 1 second( being used
for electromotion helicopter).
SOFT-START: ESC will startup brushless motor slowly in 2 seconds (being used
for electromotion helicopter).
TIMMING SETTING
LOW: using for brushless motor with 2 poles
MIDDLE: using for brushless motor with 6 poles
HIGH: in order to increase rotation rate, you can setup this item, but a few of
brushless motors will work unusually, it is recommended that you can test it on the ground at first, when you use it. Remarks: low timing is used for most of brushless motors, so it is recommended that you start to
set from the high setting to avoid damages of ESC and brushless motor because of

Source: http://www.kdsclub.com.ar/DESCARGAS/Manual_ESC_KDS_40A-ingles.pdf

mit.ocw.universia.net

Nombre_________________________________________ Grupo_________a) ¿Cuáles son los 4 tipos principales de moléculas biológicas mencionadas en clase? Cite unafunción importante de cada tipo de molécula biológica celular. b) Responda brevemente las siguientes preguntas:I)¿Cuáles son las 2 diferencias principales entre las células procariotas y eucariotas?II) ¿En qué se diferencian los

Science magazine

R E S E A R C H A N D D E V E LO P M E NT Where Is the New Science most new science in developed rather thandeveloping economies for reasons that may not in Corporate R&D? always characterize the U.S. situation. Jerry Thursby and Marie Thursby* The idea that the United States domi- or currently planned R&D facility both views of corporate R&D. For example,outside and inside

Copyright © 2010-2014 Medical Pdf Finder