Return to Safety Sheet Menu SAFETY DATA SHEET 1: IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING
Product Name: NITOMORTAR PE RESIN
Base component of two part polyester resin jointing and repair compound. Fosroc Limited
Coleshill Road, Tamworth, Staffordshire. B78 3TL
2: COMPOSITION/INFORMATION ON INGREDIENTS
All constituents of this product are listed in EINECS (European Inventory of Existing Commercial Chemical Substances)or ELINCS (European List of New Chemical Substances) or are exempt.
Refer to Section 8 for Occupational Exposure Limits. 3: HAZARDS IDENTIFICATION
Flammable. Harmful by inhalation. Irritating to eyes and skin. 4: FIRST AID MEASURES
Irrigate immediately with copious quantities of water for several minutes Obtain medical attentionurgently.
Wash immediately with soap and water or suitable skin cleanser. Remove contaminated clothingimmediately.
Remove from exposure, rest and keep warm and obtain medical attention urgently.
Wash out mouth with water. Do NOT induce vomiting. Obtain medical attention. Beware of aspiration ifvomiting occurs. 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media:
Carbon dioxide, powder, foam or water fog - Do not use water jets
Toxic fumes. For further information see Section 10. 6: ACCIDENTAL RELEASE MEASURES
Immediately issue NO SMOKING and NO NAKED FLAMES warnings. Wear selfcontained breathing apparatus and protective clothing.
Prevent entry into drains, sewers and water courses
Soak up with inert absorbent or contain and remove by best available means. Prior consent must be obtained from the local Water Company if discharged tosewer. Issue No: Date: 01.10.96 Return to Safety Sheet Menu 7: HANDLING AND STORAGE
Do not use near sources of ignition. Avoid breathing fumes. Avoid skin and eye contact. In case ofinsufficient ventilation, wear suitable respiratory equipment.
Store in a cool place away from sources of heat and out of direct sunlight to avoid pressure build up. Store in conformity with local fire regulations. 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Use only in well ventilated areas. Ensure adequate ventilation, especially inconfined areas.
In case of insufficient ventilation wear suitable respiratory equipment. Impervious gloves (eg nitrile or neoprene). Safety glasses. 9: PHYSICAL AND CHEMICAL PROPERTIES
Lower explosive limit (LEL): 1.1%, Upper explosive limit (UEL): 6.1%
10: STABILITY AND REACTIVITY
Temperatures (ºC) above 35°C. Direct sunlight.
Strong oxidising agents. Strong acids. Strong alkalis
Thermal decomposition:- Toxic fumes. Carbon monoxide. 11: TOXICOLOGICAL INFORMATION
The following toxicological assessment is based on a knowledge of the toxicity of the product's components. Oral LD50, rat 5000mg/kg. Classified as an eye and skin irritant. Health Effects On Eyes:
Irritating and may injure eye tissue if not removed promptly. Vapour may cause irritation.
By Inhalation: Harmful by inhalation. Vapours may cause headaches, dizziness and central nervous system
Severe irritation and symptoms similar to inhalation.
Repeated and prolonged skin contact may lead to skin disorders
12: ECOLOGICAL INFORMATION
May cause significant ecological damage in aquatic systems and must be usedand disposed of in accordance with the recommendations made in this safetydata sheet
Issue No: Date: 01.10.96 Return to Safety Sheet Menu
Persistence and Degradability: Not known. Expected to be not readily biodegradable. Bioaccumulative Potential:
Expected to be ecotoxic to fish/daphnia/algae. 13: DISPOSAL CONSIDERATIONS
Disposal must be in accordance with local and national legislation.
Dispose of as special waste. Dispose of through an authorised waste contractorto a licensed site.
Dispose of through an authorised waste contractor to a licensed site.
Contains flammable residues, do not crush or incinerate. Must be disposed ofthrough an authorised waste contractor. 14: TRANSPORT INFORMATION 15: REGULATORY INFORMATION Hazard Label Data:- Named Ingredients:
Flammable. Harmful by inhalation. Irritating to eyes and skin.
Do not breathe vapour. In case of contact with eyes, rinse immediately with plenty of water and seek medicaladvice. After contact with skin, wash immediately with plenty of soap and water. Wear suitable gloves and eye/face protection
Safety Data Sheets Directive, 91/155/EEC. Dangerous Preparations Directive, 88/379/EEC. Framework Waste Directive, 91/156/EEC
Highly Flammable Liquids & Liquefied Petroleum Gases Regs. 1972 (SI 917)The Special Waste Regulations 1996 (SI 972)Consumer Protection Act 1987Control of Substances Hazardous to Health Regs. 1994 (SI 3246)Environmental Protection Act 1990Environmental Protection (Duty of Care) Regs. 1991 (SI 2839)
The storage of highly flammable liquids (CS 2)Occupational skin diseases: health and safety precautions (EH 26)Occupational exposure limits (EH 40)
The above publications are available from HMSO
16: OTHER INFORMATION
Also refer to the Safety Data Sheet(s) for information on other components of this product.
The data and advice given apply when the product is used for the stated application or applications. The product is not sold as suitable for any otherapplication. Use of the product for applications other than as stated in this sheet may give rise to risks not mentioned in this sheet. The product shouldnot be used other than for the stated application or applications without seeking advice from Fosroc Ltd.
If this product has been purchased for supply to a third party for use at work, it is the purchaser's duty to take all necessary steps to secure that any personhandling or using the product is provided with the information in this sheet. Issue No: Date: 01.10.96 Return to Safety Sheet Menu
It is the responsibility and duty of the employer to inform employees and others who may be affected of any hazards described in this sheet and of anyprecautions which should be taken.
This sheet does not constitute or substitute for the users own assessment of workplace risk, as required by other health and safety legislation.
Further copies of this Safety Data Sheet may be obtained from Fosroc Limited. REVISION Supersedes issue no: Issue No: Date: 01.10.96 Return to Safety Sheet Menu SAFETY DATA SHEET 1: IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING
Product Name: NITOMORTAR PE CATALYSED FILLER
Filler component of two part polyester resin jointing and repair compound. Fosroc Limited
Coleshill Road, Tamworth, Staffordshire. B78 3TL
2: COMPOSITION/INFORMATION ON INGREDIENTS
silica sands, inert fillers, benzoyl peroxide.
All constituents of this product are listed in EINECS (European Inventory of Existing Commercial Chemical Substances)or ELINCS (European List of New Chemical Substances) or are exempt.
Refer to Section 8 for Occupational Exposure Limits. 3: HAZARDS IDENTIFICATION
May cause sensitisation by skin contact. 4: FIRST AID MEASURES
Irrigate immediately with copious quantities of water for several minutes. Obtain medical attention ifirritation persists.
Wash thoroughly with soap and water or suitable skin cleanser as soon as possible.
Remove from exposure - unlikely to occur.
Wash out mouth with water. Do NOT induce vomiting. Obtain medical attention. 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media:
Carbon dioxide, powder, foam or water fog - Do not use water jets. 6: ACCIDENTAL RELEASE MEASURES
Wear suitable protective clothing, gloves and eye/face protection.
Prevent entry into drains, sewers and water courses.
Gather into containers. Avoid the creation of dust in atmosphere. 7: HANDLING AND STORAGE
Avoid breathing dust. Avoid skin and eye contact.
Store away from acids. Store away from alkalis. Keep containers dry and tightly closed. 8: EXPOSURE CONTROLS/PERSONAL PROTECTION Issue No: Date: 12.05.97 Return to Safety Sheet Menu
In case of insufficient ventilation wear suitable respiratory equipment. Avoidskin and eye contact. Impervious gloves (eg PVC). Safety glasses. 9: PHYSICAL AND CHEMICAL PROPERTIES 10: STABILITY AND REACTIVITY
Thermal decomposition:- Carbon monoxide. 11: TOXICOLOGICAL INFORMATION
The following toxicological assessment is based on a knowledge of the toxicity of the product's components. Oral LD50, rat 5000mg/kg. Health Effects On Eyes:
Irritating and may injure eye tissue if not removed promptly.
Repeated or prolonged contact with abraded or damaged skin may cause allergic skin reaction insusceptible people. May cause sensitisation.
By Inhalation: Irritating to respiratory system. By Ingestion:
May cause irritation of mouth, throat and digestive tract.
Repeated and prolonged skin contact may lead to skin disorders. 12: ECOLOGICAL INFORMATION
When used and disposed of as intended, no adverse environmental effects areforeseen.
Persistence and Degradability: Expected to be readily biodegradable. Bioaccumulative Potential:
Not expected to be ecotoxic to fish/daphnia/algae. 13: DISPOSAL CONSIDERATIONS
Disposal must be in accordance with local and national legislation. Issue No: Date: 12.05.97 Return to Safety Sheet Menu
Dispose of through an authorised waste contractor to a licensed site.
The method of disposal must be acceptable to the local authority. 14: TRANSPORT INFORMATION
This product is NOT classified as dangerous for transport. 15: REGULATORY INFORMATION Hazard Label Data:- Named Ingredients:
May cause sensitisation by skin contact.
Do not breathe dust. In case of contact with eyes, rinse immediately with plenty of water and seek medicaladvice. Wear suitable gloves and eye/face protection
Dangerous Substances Directive, 67/548/EEC and adaptations. Dangerous Preparations Directive, 88/379/EEC. Safety Data Sheets Directive, 91/155/EEC.
Chemicals (Hazard Information and Packaging for Supply) (Amendment) Regs. 1996 (SI1092). Environmental Protection (Duty of Care) Regs. 1991 (SI 2839).
Occupational exposure limits (EH 40).
The above publications are available from HMSO
16: OTHER INFORMATION
Also refer to the Safety Data Sheet(s) for information on other components of this product.
The data and advice given apply when the product is used for the stated application or applications. The product is not sold as suitable for any otherapplication. Use of the product for applications other than as stated in this sheet may give rise to risks not mentioned in this sheet. The product shouldnot be used other than for the stated application or applications without seeking advice from Fosroc Ltd.
If this product has been purchased for supply to a third party for use at work, it is the purchaser's duty to take all necessary steps to secure that any personhandling or using the product is provided with the information in this sheet.
It is the responsibility and duty of the employer to inform employees and others who may be affected of any hazards described in this sheet and of anyprecautions which should be taken.
This sheet does not constitute or substitute for the users own assessment of workplace risk, as required by other health and safety legislation.
Further copies of this Safety Data Sheet may be obtained from Fosroc Limited. REVISION Supersedes issue no: Issue No: Date: 12.05.97
Informationen zur Tuberkulose Tuberkulose ist eine Infektionskrankheit, die durch Tuberkulosebakterien verursacht wird. Neben HIV/AIDS und Malaria gehört Tuberkulose zu den weltweit häufigsten Infektionskrankheiten. In Deutschland sind die Tuberkulosefallzahlen seit vielen Jahren rückläufig und die Erkrankung betrifft vorwiegend Menschen, bei denen Umstände vorliegen, die eine Tuberk
2013 INBF and WNBF Banned Substance list. THE FOLLOWING SUBSTANCES AND RELATED COMPOUNDS ARE BANNED BY THE WNBF AND INBF, AND THEIR USE CONSTITUTES GROUNDS FOR DISMISSAL FROM WNBF AND/OR INBF COMPETITIONS AND SUSPENSION FROM MEMBERSHIP PRIVILEGES IN THE ORGANIZATION FOR A PERIOD OF SEVEN (7) YEARS FROM THE FAILURE DATE. THE LIST IS EFFECTIVE AS OF SEPTEMBER 2, 2009. ANAB
Return to Safety Sheet Menu 
Return to Safety Sheet Menu