Material safety data sheet (msds)

Material Safety Data Sheet
1 - Chemical Product and Company Identification
Manufacturer: WD-40 Company

Trade Name: 3-IN-ONE White Lithium
Address:
1061 Cudahy Place (92110)
Grease Aerosol
P.O. Box 80607
San Diego, California, USA
Chemical Name: Organic Mixture
92138 –0607
Telephone:
Product Use: Cleaner, Lubricant
Emergency only: 1-888-324-7596
(PROSAR)
MSDS Date Of Preparation: 10/25/10
Information:
1-888-324-7596
2 – Hazards Identification
Emergency Overview:
WARNING
! Extremely flammable aerosol. Contents under pressure. Combustible Liquid and
Vapor. If swallowed, may be aspirated and cause lung damage. May cause eye, skin and
respiratory tract irritation. Use with adequate ventilation. Keep away from heat, sparks and all
other sources of ignition.
Symptoms of Overexposure:
Inhalation:
Mist or vapor can irritate the throat and lungs. High concentrations may cause nasal
and respiratory irritation and central nervous system effects such as headache, dizziness and
nausea. Intentional abuse may be harmful or fatal.
Skin Contact: May cause mild skin irritation with short-term exposure with redness, itching and
burning of the skin. Prolonged and/or repeated contact may produce defatting and possible
dermatitis.
Eye Contact: Contact may be mildly irritating to eyes. May cause redness, stinging, swelling and
tearing.
Ingestion: This product has low oral toxicity. If swallowed, this material may cause irritation of the
mouth, throat and esophagus. This product is an aspiration hazard. If swallowed, can enter the
lungs and may cause chemical pneumonitis, severe lung damage and death.
Chronic Effects: Prolonged or repeated skin contact may defeat the skin resulting in irritation
and dermatitis.
Medical Conditions Aggravated by Exposure: Preexisting eye, skin and respiratory conditions
may be aggravated by exposure.
Suspected Cancer Agent:
Yes

3 - Composition/Information on Ingredients
Ingredient
Weight Percent
See Section 8 for Exposure Limits
4 – First Aid Measures
Ingestion (Swallowed):
Aspiration Hazard. DO NOT induce vomiting. Call physician, poison
control center or the WD-40 Safety Hotline at 1-888-324-7596 immediately.
Eye Contact: Flush thoroughly with water. Get medical attention if irritation persists.
Skin Contact: Wash with soap and water. If irritation develops and persists, get medical
attention.
Inhalation (Breathing): If irritation is experienced, move to fresh air. Get medical attention if
irritation or other symptoms develop and persist.

5 – Fire Fighting Measures
Extinguishing Media:
Use water fog, dry chemical, carbon dioxide or foam. Cool fire exposed
containers with water.
Special Fire Fighting Procedures: Firefighters should always wear positive pressure self-
contained breathing apparatus and full protective clothing. Cool fire-exposed containers with
water. Use shidlding to protect against bursting cans.
Unusual Fire and Explosion Hazards: Contents under pressure. Keep away from ignition
source and open fire. Exposure of containers to extreme heat and flames can cause them to
rupture often with violent force. Combustible liquid and vapor. This material can release
flammable vapors when heated above ambient temperatures. Vapors can cause a flash fire.
Vapors are heavier than air and may travel along surfaces to remote ignition sources and flash
back. A vapor and air mixture can create an explosion hazard in confined spaces.
6 – Accidental Release Measures
Wear appropriate protective clothing (see Section 8). Eliminate all sources of ignition and
ventilate area. Contain and collect liquid with an inert absorbent and place in a container for
disposal. Clean spill area thoroughly. Report spills to authorities as required.
7 – Handling and Storage
Handling: Avoid contact with eyes. Avoid prolonged contact with skin. Avoid breathing vapors or
aerosols. Use with adequate ventilation. Keep away from heat, sparks, hot surfaces and open
flames. Wash thoroughly with soap and water after handling. Keep containers closed when not in
use. Keep out of the reach of children. Do not puncture or incinerate containers.
Storage: Store in a cool, well-ventilated area, away from incompatible materials. Do not store in
direct sunlight or above 120°F. U.F.C (NFPA 30B) Level 3 Aerosol.

8 – Exposure Controls/Personal Protection

Chemical
Occupational Exposure Limits
1000 ppm TWA ACGIH TLV (aliphatic hydrocarbon gas) 1000 ppm TWA ACGIH TLV (aliphatic hydrocarbon gas)
The Following Controls are Recommended for Normal Consumer Use of this Product
Engineering Controls:
Use in a well-ventilated area.
Personal Protection:
Eye Protection:
Avoid eye contact. Always spray away from face.
Skin Protection: Avoid prolonged skin contact. Chemical resistant gloves recommended for
operations where prolonged skin contact is likely.
Respiratory Protection: None needed for normal use with adequate ventilation.

For Bulk Processing or Workplace Use the Following Controls are Recommended
Engineering Controls:
Use adequate general and local exhaust ventilation to maintain exposure
levels below that occupational exposure limits.
Personal Protection:
Eye Protection: Safety goggles recommended where eye contact is possible.
Skin Protection: Wear chemical resistant gloves.
Respiratory Protection: None required if ventilation is adequate. If the occupational exposure
limits are exceeded, wear a NIOSH approved respirator. Respirator selection and use should be
based on contaminant type, form and concentration. Follow OSHA 1910.134, ANSI Z88.2 and
good Industrial Hygiene practice.
Work/Hygiene Practices: Wash with soap and water after handling.

9 – Physical and Chemical Properties


10 – Stability and Reactivity
Stability:
Stable
Hazardous Polymerization: Will not occur.
Conditions to Avoid: Avoid heat, sparks, flames and other sources of ignition.
Incompatibilities: Strong acids, alkalis, and oxidizers.
Hazardous Decomposition Products: Carbon monoxide and carbon dioxide, smoke fumes,
and/or unburned hydrocarbons.

11 – Toxicological Information
The oral toxicity of this product is estimated to be greater than 5,000 mg/kg based on an
assessment of the ingredients. This product is not classified as toxic by established criteria. It is
an aspiration hazard.
None of the components of this product is listed as a carcinogen or suspected carcinogen or is
considered a reproductive hazard.
12 – Ecological Information
No data is currently available.
13 - Disposal Considerations
If this product becomes a waste, it would be expected to meet the criteria of a RCRA ignitable
hazardous waste (D001). However, it is the responsibility of the generator to determine at the
time of disposal the proper classification and method of disposal. Dispose in accordance with
federal, state, and local regulations. Do not puncture or incinerate containers.

14 – Transportation Information_

DOT Surface Shipping Description: Consumer Commodity, ORM-D
IMDG Shipping Description: UN1950, Aerosols, 2.1, LTD QTY
15 – Regulatory Information
U.S. Federal Regulations:
CERCLA 103 Reportable Quantity: This product is not subject to CERCLA reporting
requirements, however, oil spills are reportable to the National Response Center under the Clean
Water Act and many states have more stringent release reporting requirements. Report spills
required under federal, state and local regulations.
SARA TITLE III:
Hazard Category For Section 311/312: Acute Health, Fire Hazard, Sudden Release of
Pressure
Section 313 Toxic Chemicals: This product contains the following chemicals subject to SARA
Title III Section 313 Reporting requirements: Zinc Oxide <1-5%
Section 302 Extremely Hazardous Substances (TPQ): None
EPA Toxic Substances Control Act (TSCA) Status: All of the components of this product are
listed on the TSCA inventory
Canadian Environmental Protection Act: All of the ingredients are listed on the Canadian
Domestic Substances List or exempt from notification
Canadian WHMIS Classification: Class B-5 (Flammable Aerosol), Class D-2-B (Toxic material
causing other toxic effects)
This MSDS has been prepared according to the criteria of the Controlled Products Regulation
(CPR) and the MSDS contains all of the information required by the CPR.

16 – Other Information:
HMIS Hazard Rating:
Health – 1 (slight hazard), Fire Hazard – 4 (severe hazard), Reactivity – 0 (minimal hazard)

TITLE: Director of Global Consumer Relations and Regulatory Affairs REVISION DATE: October 2010 SUPERSEDES:

Source: http://www.cleanflow.ca/resources/apps/documents/Lithium%20Spray%20Lubricant%20MSDS%202010.pdf

Gout

GOUT Gout is a common, recurrent condition of joint inflammation in which crystals of uric acid are deposited within joints. It is due to a uric acid overproduction or uric acid under excretion by the kidneys resulting in higher uric acid blood levels. More commonly seen in men than women, it most often appears in the big toe joint but can involve any of the joints of the limbs. If gout

Patient information: irritable bowel syndrome (ibs)

Patient Information: Reflux Disease This information sheet is for general information and is not to provide specific medical advice. You should discuss yourmedical condition with your doctor to ensure correct diagnosis, management and care. What is Reflux Disease? After a meal the stomach secretes acid to start the digestionprocess. Reflux disease, also known as Gastro-oesophageal refl

Copyright © 2010-2014 Medical Pdf Finder